Miscellaneous

Power may have failed briefly during cleaning process
Appliance was briefly switched off and then back on

• Acknowledge the error screen and restart the appliance
• Have power supply checked for possible voltage fluctuations

Safety check was no longer possible

Perform a software update Link

Pump running, but cleaning results are incomplete

Appliance was switched off during the cleaning process.

Make operators aware that cleaning must not be interrupted and that it is essential to keep the appliance switched on during cleaning

Grease or something else is blocking the cleaning-agent piping and stopping the water from circulating

• Clean regularly after the working day while the appliance is still warm so that the grease has not yet hardened or become tough
• Select a sufficiently high cleaning level

Hot water is being circulated continuously, water connection too hot

• Use a water connection that supplies cool water if at all possible

Pump not running - no cleaning result

Circulation pump is jammed and not running during the cleaning process

Open the appliance door and use the recoil hand shower to rinse out thoroughly the entire cooking chamber.

No water movement visible in the cooking chamber as would be usual during cleaning

• Switch off the appliance
• Restart the appliance after 10 sec.
• If the error still appears, contact the responsible service partner (make a note of the message on the display)