1.

Download the necessary software from the download area of the Convotherm website.

2.

Save the software, e.g. "Convotherm maxx Pro SW Package x.x.x.zip" to the hard disk of your computer (or directly to the USB stick – only recommended for fast USB sticks).

3.

Extract the files to the empty USB stick.

Please note: Never save the extracted files in a sub-directory.

4.

Safely disconnect the USB stick from the computer to avoid corrupted files or incomplete updates.

Result:

The USB stick is now prepared to carry out the software update.

1.

Switch on the combi oven.

Result:

• The Welcome page is displayed.

• The C-Dial shows a green light.

2.

Plug in the USB stick with the new software update.

Result:

The 'USB stick inserted' prompt is illuminated

3.

Press the 'Cookbook' button (1).

Result:

• 'Upd', 'b0' and 'SIb' appear in the data-input display.

• The C-Dial shows a blue light.

If 'Upd' does not appear in the data-input display, turn the C-Dial until 'Upd' is displayed (2).

4.

Press the C-Dial briefly to run the update.

Result:

The blue light on the C-Dial flashes.

After a short time the C-Dial light stops flashing and stays on continuously, and the time counts down to 0.

This may take several minutes.

5.

Wait until the combi oven has powered up again.

Result:

• The temperature is displayed.

• The cooking time is displayed.

6.

Remove the USB stick.

7.

Switch the combi oven off and back on.

Result:

The appliance is now ready for use.