Content

 
 HTML Service Page Welcome Page
Collapse CONVOTHERM MAXX PRO
   Expand For your safety
   Expand General error
   Expand Network error
   Collapse Software error messages
      Expand E00.0.x.x - (no error)
      Expand E01...
      Expand E02.x.0.x - Temperature in wiring compartment too high
      Expand E03... Fan fault
      Expand E05... Gas error
      Expand E10.x.x.x - Water filter cartridge used up, replace as soon as possible. Cooking is still possible.
      Expand E21...
      Expand E22...
      Expand E23...
      Expand E24...
      Expand E25...
      Expand E26...
      Expand E27...
      Expand E28...
      Expand E33.x.x.x - Heating fault in boiler
      Expand E34.x.x.x - Error: Boiler water cannot be emptied
      Expand E40...
      Expand E41.x.x.x - Sensing module error
      Expand E41.2.0.0 - Overtemperature of CPU sensing module
      Expand E41.5.0.0 - Cookbook Incompatible
      Collapse E42...
         Expand E42.1.1.0 - Brightness is inadequate for camera
         Expand E42.1.2.0 - Ambient brightness is too high for camera
         Expand E42.1.3.0 - Clean ConvoSenseOptic!
         Expand E42.1.4.0 - Camera not functional
         Expand E42.1.4.1 - Camera not functional
         Expand E42.2.1.0 - Distance sensor 1 (left) not working
         Expand E42.2.1.1 - Distance sensor 1 (left) not working
         Expand E42.2.1.2 - Distance sensor 1 (left) not working
         Expand E42.2.2.0 - Distance sensor 2 (right) not working
         Expand E42.2.2.1 - Distance sensor 2 (right) not working
         Expand E42.2.2.2 - Distance sensor 2 (right) not working
         Expand E42.3.0.0 - Overtemperature, camera/LED board
         Expand E42.3.1.0 - Login address error
         Expand E42.4.0.0 - Minimum temperature of camera/LED board not reached
         Expand E42.4.1.0 - Camera/LED board too hot
         Expand E42.4.2.0 - No valid temperature measurable at camera/LED board
      Expand E58.x.x.x - Cleaning agent missing!
      Expand E59.x.x.x - Rinse aid missing!
      Expand E60.x.x.x - Cleaning process cancelled
      Expand E61.x.x.x - Steam saturation error
      Expand E62.x.x.x - Cleaning agent pressure switch
      Expand E63.x.x.x - Injection pressure switch
      Expand E70...
      Expand E72.1.x.x - Grease removal error (float switch)
      Expand E72.2.x.x - Grease removal fault (grease pump)
      Expand E73...
      Expand E80.x.x.x - ID error
      Expand E81.x.x.x - Cooking operating mode error
      Expand E89...
      Expand E91.x.x.x - SD card: Initialization error
      Expand E92.1.x.x to E92.7.x.x - SD card error
      Expand E93.0.x.x to E97.1.x.x - I/O error
      Expand E99...
      Expand E200.1.x.x to E200.4.x.x - Initialization error - no connection to the SIB
   Expand Servicing tasks
   Expand Working during ongoing operation
   Expand Technical data
   Expand Connection diagrams
 Feedback Convotherm
 Legal notice
 Data privacy statement
 Index